Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory - Manual (Page 186)

Effect List
186
Speaker Simulator
Simulates the speaker type and microphone settings used to record the speaker sound.
Parameter Value Explanation
Speaker Type
Cabinet Diameter (in inches) and number of the speaker Microphone
SMALL 1 Small open-back enclosure 10 Dynamic
SMALL 2 Small open-back enclosure 10 Dynamic
MIDDLE Open back enclosure 12 x 1 Dynamic
JC-120 Open back enclosure 12 x 2 Dynamic
BUILT-IN 1 Open back enclosure 12 x 2 Dynamic
BUILT-IN 2 Open back enclosure 12 x 2 Condenser
BUILT-IN 3 Open back enclosure 12 x 2 Condenser
BUILT-IN 4 Open back enclosure 12 x 2 Condenser
BUILT-IN 5 Open back enclosure 12 x 2 Condenser
BG STACK
1
Sealed enclosure 12 x 2 Condenser
BG STACK
2
Large sealed enclosure 12 x 2 Condenser
MS STACK
1
Large sealed enclosure 12 x 4 Condenser
MS STACK
2
Large sealed enclosure 12 x 4 Condenser
MTL STACK Large double stack 12 x 4 Condenser
2-STACK Large double stack 12 x 4 Condenser
3-STACK Large triple stack 12 x 4 Condenser
Mic Setting
1, 2, 3 Adjusts the location of the microphone that is recording the sound of the speaker.
This can be adjusted in three steps, with the microphone becoming more distant in the order of 1,
2, and 3.
Mic Level 0–127 Volume of the microphone
Direct Level
(*1)
0–127 Volume of the direct sound
Level 0–127 Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “ Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl) (P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “ Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL) (P.199)”.