Auto pan, Slicer – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual

Page 173

Advertising
background image

Effect List

173

Auto Pan

Cyclically modulates the stereo location of the sound.

Parameter

Value

Explanation

Mod Wave

TRI, SQR, SIN, SAW1, SAW2, TRP

How the pan changes

TRI: Triangle wave

SQR: Square wave
SIN: Sine wave

SAW1/2: Sawtooth wave

TRP: Trapezoidal wave

Tempo Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Ø

KIT TEMPO

(P.30)

Rate (Hz)

0.05–10.00 [Hz]

Frequency of the change

Rate (note)

Note

Ø

Note

(P.197)

Depth (*1)

0–127

Depth to which the effect is applied

Low Gain

-15–+15 [dB]

Gain of the low range

High Gain

-15–+15 [dB]

Gain of the high range

Level

0–127

Output Level

*1: This parameter corresponds to MFX Ctrl. For details, refer to

Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX

Ctrl)

(P.198)”.

*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to

Controlling the MASTER EFFECT with the MASTER

EFFECT Knob (MASTER EFFECT CTRL)

(P.199)”.

Slicer

By applying successive cuts to the sound, this effect turns a conventional sound into a sound that appears to be played as a
backing phrase. This is especially effective when applied to sustain-type sounds.

Parameter

Value

Explanation

Step 01–16

0–127

Level at each step

Rate (sync sw)

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Ø

KIT TEMPO

(P.30)

Rate (Hz) (*1) 0.05–10.00

[Hz]

Rate at which the 16-step sequence will cycle

Rate (note) (*1) Note

Advertising