Humanizer, Mid-side eq – Roland SPD-SX PRO Sampling Pad with 32GB Internal Memory User Manual

Page 166

Advertising
background image

Effect List

166

*1: This parameter corresponds to MFX Ctrl. For details, refer to

Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX

Ctrl)

(P.198)”.

*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to

Controlling the MASTER EFFECT with the MASTER

EFFECT Knob (MASTER EFFECT CTRL)

(P.199)”.

Humanizer

Adds a vowel character to the sound, making it similar to a human voice.

Parameter

Value

Explanation

Drive Sw

OFF, ON

Overdrive on/off

Drive

0–127

Degree of distortion

Also changes the volume.

Vowel1

a, e, i, o, u

Selects the vowel.

Vowel2

a, e, i, o, u

Selects the vowel.

Rate (sync sw)

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Ø

KIT TEMPO

(P.30)

Rate (Hz)

0.05–10.00 [Hz]

Frequency at which the two vowels switch

Rate (note)

Note

Ø

Note

(P.197)

Depth (*1)

0–127

Depth of the effect

Input Sync Sw

OFF, ON

LFO reset on/off

If this is ON, the LFO for switching the vowels is reset by the input signal.

Input Sync Threshold 0–127

Volume level at which reset is applied

Manual

0–100

Point at which Vowel 1/2 switch

0–49: Vowel 1 will have a longer duration.

50: Vowel 1 and 2 will be of equal duration.

51–100: Vowel 2 will have a longer duration.

Low Gain

-15–+15 [dB]

Gain of the low range

High Gain

-15–+15 [dB]

Gain of the high range

Pan

L64–63R

Stereo location of the output sound

Level

0–127

Output Level

*1: This parameter corresponds to MFX Ctrl. For details, refer to

Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX

Ctrl)

(P.198)”.

*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to

Controlling the MASTER EFFECT with the MASTER

EFFECT Knob (MASTER EFFECT CTRL)

(P.199)”.

Mid-Side EQ

This effect allows the left/right signals that have similar phase to be tonally adjusted in a different way than the left/right signals

that have different phase.

Parameter

Value

Explanation

M EQ Switch

(*1)

OFF, ON

Switches whether to apply tonal adjustment to left/right

input signals that are nearly (or fully) in phase.

M Input Gain -12.00–+12.00 [dB]

Volume of left/right input signals that are nearly (or fully) in

phase

Advertising