Setting daylight saving time – Edwards Signaling eFSA250 User Manual
Page 61
Chapter 2: Front panel programming
E-FSA64 and E-FSA250 Technical Reference Manual
49
3. Enter a level one password.
4. Enter the current date.
5. Enter the current time.
6. Choose Save.
7. Press the Menu button to exit menu mode.
— or —
Continue programming
Program
Program
Auto Program
Advanced Program
Date and Time
Enter Password
0000
Date and Time
Date 01/01/2012
Time 00:00
Daylight Savings
Date and Time
Time 00:00
Daylight Savings
Save
Setting daylight saving time
Daylight saving time options allow the panel to switch automatically from
standard to daylight saving time and vice versa.
To program daylight saving time options:
1. Display the Program menu and choose Date and
Time.
2. Enter a level one password.
3. Choose Daylight Savings.
4. Choose one of the following:
Yes: The panel recognizes daylight saving time
No: The panel does not recognize daylight saving
time
5. Set the Month Start. (Values range from 01 to 12,
where 01 corresponds to January.)
6. Set the Month End. (Values range from 01 to 12.)
7. Set the Week Start. (Values range from 1 to 5,
where 5 corresponds to the last week of the
month.)
Main Menu
Reports
Test
Control
Program
Program
Auto Program
Advanced Program
Date and Time
Enter Password
0000
Date and Time
Date 01/01/2007
Time 00:00
Daylight Savings