Configuring the default manager for an edge switch – H3C Technologies H3C Intelligent Management Center User Manual
Page 41
33
Configuring the ACL number range for an edge
switch
VCM uses the ACL number range to restrict the ACL numbers available in VCM. When all ACL numbers
in the assigned range are used up, no more ACL configuration can be deployed to the edge switch from
VCM.
The ACL number range varies with device vendors.
•
The ACL number range for HP device is 100 to 199.
•
The ACL number range for Cisco devices is 2000 to 2999.
•
The ACL number range for H3C devices is 3000 to 3999.
For more information, see device configuration guides.
The ACL number range does not affect ACL configuration performed on the device.
To specify the ACL number range:
1.
Click the Resource tab.
2.
From the navigation tree, select VAN Connection Manager > Edge Switch.
All edge switches appear in the edge switch list.
3.
Click the Operation icon
for an edge switch and select ACL Number Range from the shortcut
menu.
4.
Enter the start ACL number and end ACL number. The end ACL number must be greater than or
equal to the start ACL number.
5.
Click OK.
Specifying the maximum connections for an edge
switch
6.
Click the Resource tab.
7.
From the navigation tree, select VAN Connection Manager > Edge Switch.
All edge switches appear in the edge switch list.
8.
Click the Operation icon
for an edge switch and select Max. Connections from the shortcut
menu.
9.
In the Max. Connections field, enter an integer in the range of 1 to 1000. The default is 200.
10.
Click OK.
Configuring the Default Manager for an edge
switch
The Default Manger can be configured on EVB-supported edge switches only, and only one Default
Manger can be configured on each EVB-supported edge switch. If the edge switch cannot obtain the IP