H3C Technologies H3C Intelligent Management Center - Manual (Page 92)

84
Figure 39 Configuring the vCenter Server
Deploying the VFE
To deploy the VFE, the server administrator must use the VMware plug-in, which is registered on the
vCenter Server when the VCE is deployed.
To deploy the VFE:
1. Select Home > Inventory > Hosts and Clusters.
2. Select Datacenter.
3. Click the HP VDS Management tab. HP is the plug-in name you set when you deploy the HP
5900v.
4. Click VFE Configuration in the VFE(Virtual Forwarding Engine) area.