H3C Technologies H3C Intelligent Management Center - Manual (Page 83)

75
Enabling CDP on the edge switch
For VRM to obtain the access location of a VM, you must enable CDP on the edge switch in a VMware
virtualization environment.
In this example, the edge switch is an HP Comware-based device that supports CDP.
# Enable CDP on the edge switch.
<Edge Switch>system-view
[Edge Switch]lldp compliance cdp
In a non VMware virtualization environment, install the related plug-in. For more information, see " 5
Managing plug-ins ."
Verifying ESXi host availability in VRM
1. Click the Resource tab, and then select Virtual Resource Management > Virtual Network View.
ESXi host A (192.168.5.21) is displayed in the view.
Figure 30 ESXi host in the virtual network view
2. Click the FTP Server name link or IP address link. You can see that VRM has obtained the access
switch and access interface of the VM.