H3C Technologies H3C Intelligent Management Center - Manual (Page 66)

58
All connections matching the criteria are displayed in the connection list.
To clear the query criteria and display all connections, click Reset.
Viewing detailed information about a VM
1. Click the Resource tab.
2. From the navigation tree, select VAN Connection Manager > Connection.
The connection list displays all connections.
3. Click the label link of a VM.
The Summary window appears and displays detailed information about the VM.
{
VM basic information area
− Virtual Machine Name—Name of the VM.
− Virtual Machine IP—IP address of the VM. If the VM has multiple IP addresses, the IP
addresses are separated by semicolons (;).
− CPU—Core quantity of the VM's CPU.
− Memory—Size of the VM's memory.
− Operating System—Type of the VM's operating system.
− Virtual Tools—Operating state of the virtual tools. Only VMware VMs support virtual tools.
− Status—State of the VM, Stopped or Running.
− Server—Label of the physical server to which the VM belongs. The label includes the name
and IP address of the physical server.
− vManager—Label of the vManager that manages the VM. The label includes the name
and IP address of the vManager.
{
Disk area
− Name—Name of the disk.
− Capacity—Capacity of the disk.
{
vNIC area
vNIC list contents
− Label—Name of the vNIC. If the vNIC name is not configured or cannot be configured,
this field displays the MAC address of the vNIC.
− IP—IP address of the vNIC.
− MAC—MAC address of the vNIC.
− Access Switch—Name of the switch that the vNIC is connected.
− Access Interface—Name of the interface that connects the switch to the vNIC.
4. Click Close.
Adding a connection
A network administrator can add a connection on VCM or create a connection when deploying a vApp.
For more information about deploying vApp, see " Deploying a vApp ."
To add a connection on VCM: