Minolta PI4700E - Manual (Page 100)

Paper tab 4
Pi4700e 4-17
Pr
op
er
tie
s
S
e
tti
ng
s
Chap
ter
4
✎
Note for (1)
Depending on environment used, contents of Save/Delete will be dif-
ferent: Refer to Appendix A (p. 12-11) for details.
✎
Notes for (2)
If you select a size of paper not loaded in the machine or Manual Feed,
the machine will give a message prompting you to add paper to Tray1,
Tray2, or the manual bypass port and enter into a standby state.
If the setting made in Original Document Size does not match the
size specified in the application with Fit to Paper selected, the ma-
chine takes the paper size set in the application.
Fit to Paper cannot be selected if Custom Paper is selected in Orig-
inal Document Size .
✎
Note for (3)
When using the OHP interleaving function, set the number of sets of
prints to
1 .
✎
Note for (4)
Keep Collate (Sort) on the application side set to “OFF” at all times.
(4) Collate
Use this function when making multiple sets of prints of the same document, to spec-
ify whether or not to print one set at a time.
• Uncollated All of the pages are printed one after the other. For ex-
ample, if you make five sets of prints, each page is
printed in sequence five copies at a time.
• Collated Prints are output one set at a time. For example, if you
make five sets of prints of a 10-page document, the
prints will be output one set at a time.
(5) Sorting
Select the sorting method.
• Unsorted Prints are not sorted.
• Sorted Prints are sorted.
(6) Orientation
Select the orientation of the image. You can check the selected direction using Page
Layout.
• Portrait Printing takes place lengthwise.
• Landscape Printing takes place crosswise.