Minolta PI4700E - Manual (Page 255)

8 NetWare configuration
8-24 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
6 Select the printer driver for each client operating system.
❍ When users install this printer, these drivers will be automatically
downloaded to their workstations.
❍ If the driver you need is not listed, rather than adding the driver to
the RMS, you can choose
None from the top of each list. Users will
then be asked to provide a disk with the appropriate driver the first
time they install this printer on their workstations.
7 Click Continue .
The new Printer Agent will now appear in the Printer Agent List win-
dow.
Converting Public-Access Printers to Controlled-Access Printers
To take full advantage of the security and management features provided
by NDS, you may want to convert public-access printers to controlled-ac-
cess printers.
For example, if you have used a third-party gateway to get a printer up and
running immediately (plug-and-print), the gateway automatically creates a
public-access printer. Later, you may want to convert that printer to a con-
trolled-access printer. The following procedure explains how to convert a
public-access printer to controlled-access.
Prerequisites
To create a controlled-access printer on your network, you must meet the
following prerequisites:
✔ Have at least Read, Write, Modify, and Create privileges for the desti-
nation container where its associated Printer object will reside
✔ Be designated as a manager of the NDPS Manager that will control
this Printer Agent
✔ Have a Broker running
✔ Have an NDPS Manager object
✔ Have a public-access printer created
1 In NetWare Administrator, select the container where you want the
printer to reside.
2 Choose Object — Create — NDPS Printer .
This causes the Create NDPS Printer dialog box to appear.
3 Type a name in the Printer Name field.
4 In the Printer Agent Source field, select Public Access Printer .