Minolta PI4700E - Manual (Page 45)

2 Windows NT 4.0
2-20 Pi4700e
Ins
tal
ling
the
Pr
in
ter
Dr
iv
er
Chap
ter
2
Making General Settings Before Using the Printer
The printer driver requires setting of items that are common to all print
jobs, including the port to which the printer cable is connected and option-
al devices configured with the machine. These settings must be made us-
ing property dialog box available from the Properties command after the
printer driver has been installed or whenever the operating environment is
changed.
The most common settings were made when the printer driver was in-
stalled, meaning that you do not usually bother to change them. Some
items must, however, be changed in the following cases.
For the details of “Device Options Setting tab”, see page 4-2.
Cases where changes are necessary Applicable property tab
You want to add a comment to distinguish the printer
from others General
The computer’s connecting port has been changed
You want to change the conditions for the display of
a timeout error
You want to designate a port to which the machine is
connected via a network (this setting must be made
on a computer connected to the machine via a net-
work) Ports
You want to specify a time frame for the machine op-
eration Scheduling
You want to share the machine with other computers
connected to the same network (this setting must be
made on the computer directly connected to the ma-
chine) Sharing
You want to restrict access to the machine
You want to check the accounts of the machine users Security
This setting is not related to printing. Pressing