Minolta PI4700E - Manual (Page 22)

Connecting the Controller 1
Pi4700e 1-7
Bef
o
re
Us
in
g th
e P
ri
n
te
r
Dr
iv
er
Ch
apte
r 1
✎
Note
The NIC Board must be mounted to use the scanner functions.
1.3 Connecting the Controller
The controller is installed inside the machine. The installation procedures
are to be performed by service personnel.
The controller is connected to the computer by a printer cable or network
cable. Power to the controller is supplied from the machine.
✎
Tip
If you cannot print from your computer, make sure that the printer ca-
ble or network cable is connected to the corresponding connectors.