Minolta PI4700E - Manual (Page 154)

Properties settings 5
Pi4700e 5-35
Pr
in
ter
Dr
iv
er
f
o
r Li
nux
Ch
apte
r 5
Conflicts dialog box
The Conflicts dialog box, like the one shown below, appears when a set-
ting that conflicts with another made previously is made on a tab.
When the following dialog box appears, it shows that the currently select-
ed settings conflict with each other.
When the Conflicts dialog box appears, it shows the settings that could not
be combined with each other. Check the details, and click the
Cancel but-
ton to quit.
✎
Tip
The dialog box looks slightly differently from this one when Device Op-
tions are being set or the PS driver is being used.
✎
Note
Some settings, which are defied by the machine for the restricted com-
binations of different functions, can at times be accepted by the printer
driver. If a print command is issued from the personal computer with
such settings made, the machine does not produce the output correct-
ly or abandons the job to produce nothing. Make sure that you make
correct settings.