Minolta PI4700E - Manual (Page 124)

Printer setting with X window System 5
Pi4700e 5-5
Pr
in
ter
Dr
iv
er
f
o
r Li
nux
Ch
apte
r 5
4 When the personal computer has been directly connected to the ma-
chine, select
Local Printer .
✎
Note
If you install a printer driver to the computer which has been connected
via network, be sure to consult the network administrator.
To the network administrator: When the setting of the driver is to be
selected via network with Remote Printer, Remote Unix (1pd) Queue,
etc., printer queue, printer name, IP address, etc. are necessary. Input
“PORT1” for printer queue.
5 The printer device will be detected. Click the OK button.
If not detected, check to see if the port is already in use.