Minolta PI4700E User Manual
Page 81
3
Specifying network settings from PageScope Light
3-34
Pi4700e
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
After you configure the NetBIOS (WINS) settings, restart the printer.
The network interface card’s status page should now show that the net-
work interface card is successfully registered with the WINS server. The
items labeled
Primary Server Logged
in and
Secondary Server
Logged
in on the
WINS Configuration
screen now indicate which WINS
server(s) the network interface card is registered with.
Under normal circumstances, your network interface card automatically
renews its registration with the WINS server before its lease expires.
Reset
This screen appears when you click the
Reset
menu on the
Network
tab.
Use this screen to reset the network interface card so new settings can
take effect.
Primary Server Logged in
Name of the Primary WINS Server to which the printer is cur-
rently logged in.
Secondary Server Logged
in
Name of the Secondary WINS Server to which the printer is
currently logged in.
Apply button
Click this button to apply any settings you have input up to this
point.
Clear button
Click this button to cancel any settings you have input up to this
point.
Password
Input the password assigned to the network interface card. The
initial factory default is
sysadm
. Clicking the
Apply
button after
inputting the wrong password displays a password error mes-
sage without changing the settings.
Reset button
Click this button to reset the network interface card.