Aix version 2.5 – Minolta PI4700E User Manual
Page 384
UNIX Configuration
12
Pi4700e
12-33
A
ppe
ndi
x
Chap
ter
12
AIX Version 2.5
This section describes how to set up a remote printer on the host that
sends jobs to the Network Card using the Network Card’s lpd.
1
At the prompt, type:
#smit spooler
2
On the window that appears, select
Manage Remote Printers
.
3
On the menu, select
Client Services
.
4
On the next menu, select
Remote Printer Queues
.
5
On the next menu, select
Add a Remote Queue
.
6
Change the values on the window that appears to the settings for the
Network Card.
The values that first appear on the window are initial defaults. You
must replace the short and long form filter values with the values
shown below.
7
After inputting all the values you want, press
to complete the
configuration.
Item
Example
Input Data Description
Name of queue to add
print1
Local printer name
queue Destination Host
printfast
Network Card IP address
Short Form Filter
/usr/lpd/bsdshort
Required value
Long Form Filter
/usr/lpd/bsdlong
Required value
Name of remote printer queue
PORT1
Network Card queue (You
can use any name you want
here.)
Queue Name of device to add
print1
Local queue name
Enter