Minolta PI4700E - Manual (Page 273)

8 Using the utility software
8-42 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
✎
Note
Disabling this option also disables the Primary File Server field.
● Primary File Server
Specifies the NetWare file server used by the Network Card as the pri-
mary file server. When no primary file server is selected yet or when
the selected server cannot be used for some reason, the first file serv-
er on the list is selected automatically.
Print Server Settings
Use the settings on this dialog box to configure a print server printer. This
information is normally input using the NetWare
NWADMIN or the PCON-
SOLE utility. NWSetup can also be used to make Network Card printer
settings, even though it does not include the above NetWare utilities. The
following explains each of the settings.
● Enable Printer
Enables and disables a Network Card and printer support.
❍ Checking this box enables the printer.
❍ Unchecking this box disables the printer and causes all other fields on
this dialog box to appear dimmed.
● Printer Name Queues Serviced by Printer
Shows the printer name. You cannot change the content of this field.
It lists all the queues serviced by the printer.
❍ A bindery connection queue is shown using the syntax: bindery server
name: queue name.
❍ An NDS connected queue entry includes the distinguished name.
Example:
When the printer services a queue named YOURPTR_Q on a bindery
server named OLD_SERVER , this list shows the entry
OLD_SERVER:YOURPTR_Q .
When the printer services a queue named ENGINEERING_Q on an NDS
server with the distinguishing name ENGINEERING.CORP , this list
shows the entry ENGINEERING_Q.ENGINEERING.CORP .
● User/Groups Notified by Printer
This field lists all of the users and user groups to which notification is
sent when a printer error is detected.
❍ A bindery connected user or user group is shown using the syntax:
bindery server name:user/group name.
❍ An NDS connected user or user group entry includes the distinguished
name.