Minolta PI4700E - Manual (Page 56)

Peer-to-Peer Printing Program (Windows) 3
Pi4700e 3-9
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
Setting Up the Peer-to-Peer Printing Program
1 On the Start menu, point to Programs and then Ip-p2p .
2 On the submenu that appears, click IP-P2P .
Make the settings you want on the dialog box that appears.
❍ Max Hops for Search
Input a value for the maximum number of hops for the search. The
initial default value is 2. See the precautions under “Management
Access Program (Windows)” (p. 8-28) for more information about
the maximum number of hops.
❍ IP Port Base
Input the print server initial port number. The initial value is 10000
(TCP/IP port 10001), but you can change this setting if you need
to.
❍ Printer Names
Select the printer port name display format.
based on Serial Numbers
Select this option to use Network Card serial numbers to distin-
guish between printers. The serial number is displayed as follows:
MLT_<serial number>
When a Network Card serial number is SN991354, for example,
the printer port name becomes MLT_991354.
based on IP Address
Default display format. Select this option to use IP addresses to
distinguish between printers. When the IP address is
199.99.92.99, for example, the printer port name becomes
199.99.92.99.