Minolta PI4700E - Manual (Page 52)

Peer-to-Peer Printing with TCP/IP 3
Pi4700e 3-5
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
3.3 Peer-to-Peer Printing with TCP/IP
Use the bundled IP Peer-to-Peer Printing Program for TCP/IP peer-to-
peer printing under Windows.
Configuration Procedure (Windows 95/98/Me)
1 Install TCP/IP under Windows.
Refer to the applicable Windows documentation for more information.
2 Assign the IP parameters.
See “3.2 Specifying the IP Address From the Printer’s Touch Panel”
(p. 3-2) for more information.
3 Install the IP Peer-to-Peer Printing Program.
Use the IP Peer-to-Peer Printing Program for peer-to-peer printing.
See “3.4 Peer-to-Peer Printing Program (Windows)” (p. 3-8) for more
information.
4 Use the procedure below to install the printer.
Digital Copier
Network Card
TCP/IP
Windows TCP/IP
IP Peer to Peer Printing Program