Minolta PI4700E - Manual (Page 198)

Printing on both sides of the paper 7
Pi4700e 7-3
Co
nv
eni
ent F
u
nc
tio
n
s
Ch
apte
r 7
6 Select Long Edge Binding or Short Edge Binding from Duplex/
Booklet .
If Long Edge Binding is selected, printing will be performed on both sides
of each page so that the printed pages form a book when they are bound
along the long edge. If
Short Edge Binding is selected, printing will be
performed on both sides of each page so that the printed pages form a
book when they are bound along the short edge.
✎
Tip
The Duplex/Booklet icon shows which edge is to be bound.
7 If you want to staple the printed pages, click Detail Of Output Setting
to open the dialog box and select Corner Staple in Staple . Then, click
the OK button.
✎
Note
When Long Edge Binding is selected, Short Edge cannot be selected
for punch hole.
When Short Edge Binding is selected, Long Edge cannot be selected
for punch hole.
✎
Tip
To make holes in the printed pages, select
Long Edge or Short Edge
in Punch on Detail of Output Setting .
8 Make other settings as necessary and click the OK button.
9 The Print dialog box will reappear. Click the OK button.
10 The data will then be transferred to the machine and printing will soon
start.
Long Edge Binding Short Edge Binding