Minolta PI4700E - Manual (Page 259)

8 Using the utility software
8-28 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
7 Close the Chooser .
This completes configuration of the network and printer. The printer can
now be used for printing from different applications. Note that you do not
need to open the
Chooser and click the Setup button again once you
complete the above procedure.
Network Card Configuration
The Network Card comes with NIManage for AppleTalk, which is a Mac-
intosh utility program for configuring the Network Card. (Except Mac OS
X)
See “NIManage for AppleTalk (Macintosh)” for information about installing
NIManage for AppleTalk and using its various features and functions.
8.7 Using the utility software
Management Access Program (Windows)
Management Access Program (MAP) is a Windows utility that automati-
cally detects IP and IPX-based Network Cards on a network and provides
a Web browser-based setting and management environment.
MAP automatically detects all the Network Cards on the network and lists
them on a Web browser page. Clicking one of the Network Cards listed on
the Web browser page accesses the Network Card’s built-in HTTP server.
The Web browser can then be used to make Network Card settings.
Requirements
● Computer must have TCP/IP installed and enabled.
● Computer must have IPX/SPX-compatible protocol installed. (Re-
quired only when using the IPX search function.)
● Computer must have a Web browser installed.
● Operating system: Windows 95, 98, Me, NT 4.0 or 2000.
✎
Note
See Appendix A - Installing and Setting Up Network Protocol (Win-
dows) and the applicable Windows documentation for information
about installing TCP/IP and IPX/SPX under Windows.