Minolta PI4700E - Manual (Page 78)

Specifying network settings from PageScope Light 3
Pi4700e 3-31
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
IPP Configuration
This screen appears when you click the IPP Configuration menu on the
Network tab. It lets you change Internet Printing Protocol (IPP) settings.
You can configure the printer functions that are controlled by IPP and the
printer information that can be seen from IPP clients.
✎
Note
Standard access for IPP printing is:
http://<IP Address>:631/nic/Print
For details about IPP printing, see “8 Network Interface Card”.
Password Input the password assigned to the network interface card. The
initial factory default is
sysadm . Clicking the Apply button after
inputting the wrong password displays a password error mes-
sage without changing the settings.
Enable IPP Check this option to enable IPP on the network interface card.
You cannot use IPP print unless this option is checked.