Minolta PI4700E - Manual (Page 123)

5 Printer setting with X window System
5-4 Pi4700e
Pr
in
ter
Dr
iv
er
f
o
r Li
nux
Ch
apte
r 5
5.2 Printer setting with X window System
Making general settings before using the printer
The printer driver requires setting of items that are common to all print
jobs, including the port to which the printer cable is connected and any op-
tional devices configured with the machine: Note that these settings must
be made only after the printer driver has been installed.
See page 5-19 if you refer to Device Options Setting in dialog box.
Redhat Linux
With Redhat Linux, setting is performed from Printer Configuration in the
control panel. The following shows how to display Printer Configuration :
✎
Tip
With Redhat Linux,
Printer Configuration window can also be dis-
played by executing printtool command from Terminal window.
1 Click menu button and open System – Control Panel .
2 When control panel is opened, click the Printer Configuration button.
Printer system manager will open.
3 First, click the Add button of the printer manager.