Minolta PI4700E - Manual (Page 395)

12 UNIX Configuration
12-44 Pi4700e
A
ppe
ndi
x
Chap
ter
12
9 Next, input the following to kill all your lpd/lpr processes.
kill -9 <Process ID>
This stops all printing.
10 Next, type the following to restart the daemon.
/usr/lib/lpd
11 This completes installation. In response to the message about wheth-
er you want to install another printer, input
yes or no and then press
.
Ping the Network Card to test communication.
DEC ULTRIX 4.3
1 Type the following to run the installation script:
nicinst
The script automatically downloads the appropriate Network Card util-
ities for your system and displays questions to prompt you for the in-
formation it needs.
2 What is the node name of the Print Server Unit?
Input the host name recorded in
/etc/hosts . For example, type print-
fast and then press .
3 What is the printer name?
Type the printer name and press .
4 Here, the script displays the information you have input up to this point.
Node name of the Print Server Card: printfast
Printer name to be used: <printer name>
The printer is attached on: PORT 1
Check these settings and make sure they are correct. If they are cor-
rect, type
yes and press . Otherwise, type no and press .
5 Is this printer PostScript?
Type yes and press if the printer is a PostScript printer. Other-
wise type no and press .
Enter
Enter
Enter
Enter Enter
Enter
Enter