Minolta PI4700E - Manual (Page 113)

4 Overlay tab
4-30 Pi4700e
Pr
op
er
tie
s
S
e
tti
ng
s
Chap
ter
4
✎
Tips
Specify the position from the center. The Horizontal positive direction
is to the right, and the Vertical position direction is upward.
You can check the set contents using (1) Preview.
(12) Angle
Specify the angle of the characters with respect to the paper.
• Fixed Angle Standard fixed angle of the driver.
Available settings: Horizontal, Diagonal, Vertical,
User Setting
• User Setting If you select User Setting from Fixed Angle, you can set
any desired angle.
Setting range: -180°to +180° (A – (minus)
value rotates the characters
clockwise, 0 leaves the char-
acters parallel to the paper,
and a + (plus) value rotates
the characters counterclock-
wise.)
(13) Position
Specify the position at which you wish to print a watermark.
• Center The watermark is printed at the center of the paper.
• User Setting You can specify a position by entering numbers in the
Horizontal and Vertical boxes.
Setting values:
Horizontal: -999pt to 999pt (in 1pt steps)
Vertical: -999pt to 999pt (in 1pt steps)
(72pt = 1inch)