Minolta PI4700E - Manual (Page 68)

IPP Printing 3
Pi4700e 3-21
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
3.8 IPP Printing
This section explains how to use the Windows 2000/XP standard IPP
printing function.
Requirements
● Computer must have TCP/IP installed and enabled.
● Network Card must have valid IP parameters assigned.
Configuration Procedure
1 Install TCP/IP under Windows 2000/XP.
Refer to the applicable Windows documentation for more information.
2 Assign the IP parameters.
See “3.2 Specifying the IP Address From the Printer’s Touch Panel”
(p. 3-2) for more information.
3 Use the procedure below to install the printer.
Installing the printer
1 For Windows 2000, on the Start menu, point to Settings and then
click Printers .
For Windows XP, on the Start menu, click Printers and Faxes .
2 For Windows 2000, double-click the Add Printer icon to start the Add
Printer Wizard.
For Windows XP, click the
Add Printer icon to start the Add Printer
Wizard.
Digital Copier
Network Card
IPP
Windows 2000/XP
TCP/IP
IPP Client