Minolta PI4700E - Manual (Page 183)

6 Print options
6-28 Pi4700e
P
rin
te
r D
riv
er
fo
r M
a
cin
to
s
h
Cha
p
ter 6
Following are the minimum requirements for enabling crisscross sort-
ing:
Stacks of paper of the same size, loaded in both lengthwise
and crosswise direction.
Staple, Punch or Front Cover Page is not set.
(8) Staple <only when Multi-staple Finisher, Single-staple Finisher, Mailbin Finisher or
Folding finisher is mounted>
Select whether to staple each copy set of the document.
• Off Does not staple the printed pages.
• Corner Staples together each copy set at its corner.
• Short Edge <only when Multi-staple Finisher or Folding Finisher is
mounted> Stapled along the short edge of the docu-
ment.
• Long Edge <only when Multi-staple Finisher or Folding Finisher is
mounted> Stapled along the long edge of the docu-
ment.
• Center <only when Folding Finisher is mounted> Stapled at
the center of the document.
(9) Punch <only when Multi-staple Finisher, Mailbin Finisher or Folding Finisher is
mounted>
Select whether to punch holes in the printed pages.
• Off Does not punch holes.
• Short Edge Punches holes along the short edge of the document.
• Long Edge Punches holes along the long edge of the document.
(10) Folding <only when Folding Finisher is mounted>
Set the folding functions for finishing.
• Off Does not fold the printed page.
• Crease Makes a crease in the printed page.
• Crease + Staple Staples the printed page at the center with a crease
made in it.
• Half Folding Folds the printed page in two.