Minolta PI4700E - Manual (Page 271)

8 Using the utility software
8-40 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
Novell NetWare Settings
This section explains the contents of the Print Server Settings dialog box.
Print Server Settings has two screens for setting, and you must input
settings for both to configure a Network Card for Novell NetWare. Each
screen lets you set up your version of Novell Netware for the Network
Card, including directory and bindery services.
● Print Server Name
Specifies the NetWare print server name. This name is used when the
Network Card logs into NetWare. Make sure the name you input is dif-
ferent from anything in the network directory and server bindery. This
field accepts input of up to 48 characters.
● Print Queue Scan Rate
Specifies the rate when the Network Card polls the print queue. Spec-
ifying 1 for this field, for example, polls for a new print job once every
second. You can specify a value within the range of 1 to 250.
● Print Server Password and Print Server Password Retype
Specifies the password when the Network Card logs into NetWare.
Changing the contents of this field changes the password for both Net-
Ware and the Network Card. This field accepts input of up to 32 char-
acters. This dialog box does not close if the contents of the
Password
and Password Retype fields are not identical.