Minolta PI4700E - Manual (Page 238)

NetWare configuration 8
Pi4700e 8-7
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
Configuring in the Bindery Mode
After you confirm that your server has a bindery context, use the following
procedure to configure the Network Card.
1 Log into the server where you want to install the print server as super-
visor or as a user with equivalent privileges.
2 Type PCONSOLE and press to display the Available Options
screen.
3 Press to enter the bindery mode.
✎
Note
If a message appears telling you to log in with bindery connection, it
means that the attached server does not have bindery mode enabled.
Either perform the procedure under “Confirming the Bindery Context”
or log onto a server with bindery services enabled.
4 On the Available Options screen, select Quick Setup and then press
.
Use Quick Setup to connect the print server, print queue, and printer
you want to use. You will be able to change this settings later if you
want.
5 Select Print Server and then press to modify the entry.
6 Type the name of the print server you want to use into the New print
server field, and then press .
Enter
F4
Enter
F3
Enter