Minolta PI4700E - Manual (Page 39)

2 Windows 2000/XP
2-14 Pi4700e
Ins
tal
ling
the
Pr
in
ter
Dr
iv
er
Chap
ter
2
Displaying a Properties dialog box from the Printer Folder
1 Click the Start button and select Settings . Then, click Printers .
2 Click the appropriate printer icon (ex. Minolta Di470 PCL6).
3 <To display the General dialog box>
Click
Properties from the File menu.
4 <To display Printing Preferences dialog box>
Click
Printing Preferences… from the File menu.
It allows you to set the environment in which you will use the printer. The
settings made through this method are valid in all applications.
Displaying a Properties dialog box from an Application Menu
As an example, the procedure for the PCL6 printer driver is described below.
1 Select Print... from the File menu of the application.
2 Make sure that the Select Printer of the General is Minolta Di470
PCL6 : If Minolta Di470 PCL6 is not listed, click
▼ and, from the menu
that will then appear, select Minolta Di470 PCL6 .
This method allows you to set the number of copies and paper for each
document.
Note that the settings made on the properties dialog box accessed
through the application are valid only for that particular application.
✎
Tip
To set the Device Options Setting, which need not be changed unless
device is changed, open it from the Printers window to set.
To show a properties dialog box other than Setup, click the corre-
sponding tab located on the top part of the screen.
✎
Note
The steps to display a properties dialog box may be different depending
on the application. Follow the correct procedure according to the appli-
cation. The procedure above is based on the application WordPad.
With PostScript printer driver, the contents are different between when
the properties dialog box is accessed from Print Manager and when it
is accessed from an application.