Minolta PI4700E - Manual (Page 390)

UNIX Configuration 12
Pi4700e 12-39
A
ppe
ndi
x
Chap
ter
12
✎
Note
Do not input a space after the remote host name.
Enable <local printer name>
Accept <local printer name>
Linux
With Red Hat Print System Manager, you can configure the printer on a
graphical setup screen. See Configuring the Printer Using the printtool
Command for more information.
If your system does not have Red Hat Print System Manager installed,
you can configure the printer by editing the contents of the
/etc/printcap file. See Configuring the Printer by Editing the printcap File
for more information.
Configuring the Printer Using the printtool Command
1 Start x terminal.
2 At the command prompt, enter the printtool command. This causes
the Red Hat Print System Manager window to appear.
3 Click the Add button.
This causes the Add Printer Entry window to appear.
4 Choose Remote Unix (lpd) Queue and click OK .
This causes the Edit Remote Unix Queue Entry window to appear.
5 Specify the printer name.
6 Select or add the spool directory (typically, /usr/spool/lpd/<printer
name>)
7 In the Remote Host field, specify the IP address of the Print Server
Card.
8 In the Remote Queue field, specify PORT1 .
9 Optionally, specify an input filter.
10 When you finish, click OK .