Minolta PI4700E - Manual (Page 53)

3 Peer-to-Peer Printing with TCP/IP
3-6 Pi4700e
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
Installing the printer (Windows 95/98/Me)
1 On the Start menu, point to Settings and then click Printers .
2 Double-click Add Printer and install the printer. Make the new printer
the default printer.
See “2 Installing the Printer Driver” (p. 2-1) for details about how to in-
stall it.
3 Right-click the new printer icon and select Properties from the menu.
4 Display the Details tab.
5 Click the Print to the following port box and then select the port add-
ed by the IP Peer-to-Peer Printing Program.
6 Click the Apply button of the Properties dialog box.
7 Display the General tab and print a test page.
8 If the test prints normally, complete the procedure by clicking OK to
close the Properties dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows 95/98/Me systems are configured the same way as de-
scribed above.