Minolta PI4700E - Manual (Page 64)

LPR Printing 3
Pi4700e 3-17
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
3.7 LPR Printing
This section explains how to use the Windows NT 4.0/2000/XP standard
LPR printing function.
Requirements
● Computer must have TCP/IP installed and enabled.
● Network Card must have valid IP parameters assigned.
Configuration Procedure (Windows NT 4.0)
1 Install TCP/IP and Microsoft TCP/IP Printing service under Windows
NT.
Refer to the applicable Windows documentation for more information.
2 Assign the IP parameters.
See “3.2 Specifying the IP Address From the Printer’s Touch Panel”
(p. 3-2) for more information.
3 Use the procedure below to install the printer.
Digital Copier
Network Card
TCP/IP
Windows NT 4.0/2000/XP
TCP/IP
Microsoft TCP/IP Printing