Minolta PI4700E - Manual (Page 387)

12 UNIX Configuration
12-36 Pi4700e
A
ppe
ndi
x
Chap
ter
12
DEC ULTRIX 4.3 RISC, OSF1/ALPHA
Use the following procedure to set up a remote printer on the host that
sends jobs to a Network Card.
1 At the prompt, type:
lprsetup
2 Select add .
3 Type a printer name and then press .
4 When the following message appears, press .
“Do you want more information on specific printer types?”
5 This displays a list of printers supported by ULTRIX. Type the follow-
ing:
remote
6 Type the printer synonym (alias) and then press .
7 Specify the spooler directory and then press .
If you want to use the default spooler directory shown on the screen,
press
without inputting anything.
8 Specify the remote system name and then press .
9 Type an appropriate name (like PORT1 ) for the remote system printer,
and then press .
10 From the list that appears on the display, select the printcap symbol
name. Next, type the following.
Q
11 This displays the configuration. If it is correct, type Y . If something is
wrong, type N .
The following table shows some sample settings.
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Item Type Input Data Description
lp (line printer) STR
rm (remote host) STR Network Card host name
rp (remote printer) STR PORT1 (You can use any name you want
here.)
sd (spooler directory) STR /usr/spool/lpd7