Minolta PI4700E - Manual (Page 232)

Outline 8
Pi4700e 8-1
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
8 Network Interface Card
8.1 Outline
The following shows the general outline of this chapter.
● “Getting ready”
● “Setting up the network card”
Read the section that covers your particular network environment.
● “Windows configuration”
● “NetWare configuration”
● “Macintosh configuration”
Refer to these sections as required.
● “Using the utility software”
Read the following sections when necessary.
● “Troubleshooting”
● “Jumper switch setting”
● “Specifications”
8.2 Getting ready
This Network Card is a multi-protocol network card that provides Ethernet
connection for the Minolta Pi4700e printer controller and offers the follow-
ing features.
● Automatic Ethernet type detection (10BaseT, 100BaseT)
● Fully transparent AppleTalk printing support for the Macintosh, includ-
ing support for binary PostScript printing.
● Peer-to-peer printing program allows printing on a network without go-
ing through a server
❍ Peer-to-Peer Printing with TCP/IP (Windows 95/98/Me/NT 4.0)
❍ Peer-to-Peer Printing with IPX/SPX (Windows 95/98/Me)
● Novell NetWare PSERVER support under bindery base or Novell Di-
rectory Services (NDS)
● lpr/lpd functions under TCP/IP
● SNMP control using MIB-II and private MIB
SNMP support using standard MIB on a compatible printer or printer-
specific MIB