Minolta PI4700E User Manual
Page 399
12
UNIX Configuration
12-48
Pi4700e
A
ppe
ndi
x
Chap
ter
12
✎
Note
<print serve name> must be the same as the one recorded in
/etc/
hosts
. Optional arguments inserted between the
10001
entry and be-
fore the trailing
0
are
${banner}
,
${user_name}
,
${request_ID}
, and
${files}
. For details, see the System V Release 4 System Administra-
tion Manual.
7
Save the file and quit the editor.
8
You need to use lpadmin to configure the host printer. Type the follow-
ing:
lpadmin -p <printer name> -v /dev/null -i
/usr/nic/port1_interface
✎
Note
lpadmin
configures the printer name and associates it with a given de-
vice and printer interface program. There is no
/etc/printcap
file in-
volved with this method of configuration.
9
Next, initialize the printer. Type the following commands:
accept <printer name>
enable <printer name>
✎
Note
After each entry, lpadmin acknowledges the invoked command.
10
Next, type the following command:
lp -d<printer name> /etc/hosts
11
Check for output or type the following:
lpstat <printer name>
Or:
lpstat -t
Enter
Enter
Enter