Minolta PI4700E - Manual (Page 127)

5 Printer setting with X window System
5-8 Pi4700e
Pr
in
ter
Dr
iv
er
f
o
r Li
nux
Ch
apte
r 5
4 Specify optional name for printer queue.
5 Make sure that positions where SPOOL directory is to be prepared
and printer device are specified. After checking is complete, select the
OK button.
✎
Note
When setting is performed using network printer, LPD setting (Remote
Hostname, Remote Queue) should be made in addition to above set-
ting. Input “PORT1” for Remote Queue.
With Turbo Linux4.0, some other setting should be made on Edit Print-
er Setting screen. For setting of printer type, select
Postscript Print-
er . Other settings can be left as default settings.