Minolta PI4700E - Manual (Page 95)

4 Setup tab
4-12 Pi4700e
Pr
op
er
tie
s
S
e
tti
ng
s
Chap
ter
4
✎
Tip for (1)
The tray containing the paper on which the body of the document is to
be printed is displayed in green on the Printer Figure.
✎
Notes for (2)
When using the OHP interleaving function, set the number of sets of
prints to “1”.
You cannot select the same paper take-up port for both Paper Source
and Interleaving Paper Source .
You can set Manual Feed only using Paper Source .
OHP interleaving and two-sided printing cannot be set simultaneously.
✎
Tip for (2)
The OHP film tray is displayed in green on the Printer Figure.