Minolta PI4700E - Manual (Page 91)

4 Setup tab
4-8 Pi4700e
Pr
op
er
tie
s
S
e
tti
ng
s
Chap
ter
4
✎
Note
With the PS driver, the Watermark option is included on the
Setup tab.
For details, refer to “Overlay tab” on page 4-27.
(1) N-up
Outputs multiple originals on one sheet of paper.
• N-up Set the N-up number.
Available settings: Off, 2up, 4up, 6up, 9up, 16up
• Border line Sets the layout border
• N-up Style Sets the printing layout
(2) Duplex / Booklet <when Dup + 2way Tray, Dup + LCC or Duplex Cabinet is in-
stalled>
Specifies two-sided printing and Booklet printing.
• Off Not set
• Short Edge Binding Two-sided printing takes place so that the short edge is
bound.
• Long Edge Binding Two-sided printing takes place so that the long edge is
bound.
• Booklet Left Binding Four pages are printed on both sides of a single sheet
of paper so that when the sheet is folded in the middle
it forms a booklet (left bound).
• Booklet Right Binding Four pages are printed on both sides of a single sheet
of paper so that when the sheet is folded in the middle
it forms a booklet (right bound).
(3) Paper Source
Selects the machine tray to be used.
Sets the cover page function and the OHP interleaving function.
• Paper Source Select the machine tray to be used.
The selectable paper sizes are limited by the types of
paper take-up trays installed in the machine.
Available settings:
Auto, Manual Feed, Tray1 to 4, LCC, LCT
• Detail of Paper Source Set the cover page function and OHP interleaving func-
tion. For details, see page 4-11.
Horiz.
Ascending Horiz.
Descending Vert.
Ascending Vert.
Descending