Minolta PI4700E - Manual (Page 32)

Windows 95/98/Me 2
Pi4700e 2-7
Ins
tal
ling
the
Pr
in
ter
Dr
iv
er
Chap
ter
2
Displaying a Properties dialog box from the Printers window
1 Click the Start button and select Settings . Then, click Printers .
2 Right-click the appropriate printer icon (ex. Minolta Di470 PCL6).
3 Select Properties from the menu that will appear. This shows the
properties dialog box.
It allows you to set the environment in which you will use the printer. The
settings made through this method are valid in all applications.
Displaying a Properties dialog box from an Application Menu
As an example, the procedure for the PCL6 printer driver is described be-
low.
1 Select Print... from the File menu of the application.
2 Make sure that the Name of the Printer is Minolta Di470 PCL6 : If Mi-
nolta Di470 PCL6 is not listed, click ▼ and, from the menu that will
then appear, select Minolta Di470 PCL6 .
3 Click the Properties button. This shows the properties dialog box.
This method allows you to set the number of copies and paper for each
document.
Note that the settings made on the properties dialog box accessed
through the application are valid only for that particular application.
✎
Tip
To set the Device Options Setting, which need not be changed unless
device is changed, open it from the Printers window to set.
To show a properties dialog box other than Setup, click the corre-
sponding tab located on the top part of the screen.
✎
Note
The steps to display a properties dialog box may be different depend-
ing on the application. Follow the correct procedure according to the
application. The procedure above is based on the application Word-
Pad.