Minolta PI4700E - Manual (Page 237)

8 NetWare configuration
8-6 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
Confirming the Bindery Context
Before installing the Network Card under Novell NetWare 4.x in the bind-
ery emulation mode, you should first confirm whether the server has a
bindery context (name assigned to the server by the bindery services
mode). If it doesn’t, install in the NDS mode.
Bindery context is required to install the Network Card in the bindery em-
ulation mode. Use the following procedure to confirm whether your server
has bindery context.
1 On the NetWare 4.x server, type:
load install
2 Select Maintenance/Selective Install from the menu.
3 On the Installation Options menu, select NCF File Options .
4 From the menu of available NCF file options, select Edit AUTOEX-
EC.NCF .
5 Search the file and check to see if it contains a statement similar to the
one shown below.
SET BINDERY CONTEXT=OU=ENG
OU=ENG is an example file server context. Use your own file server
context in place of OU=ENG .
6 At the console prompt, type the SET BINDER CONTEXT statement
exactly as you entered it in your AUTOEXEC.NCF file.
✎
Note
The command you type at the console prompt takes effect immediate-
ly. The contents defined in the AUTOEXEC.NCF file take effect when
the server is shut down and then restarted.
Enter