Minolta PI4700E - Manual (Page 265)

8 Using the utility software
8-34 Pi4700e
Netw
or
k
I
n
ter
fa
c
e
Car
d
Chap
ter
8
NIManage for AppleTalk (Macintosh)
This program lets you change Network Card settings on a Macintosh. It
provides the following functions.
● Modification of printer name and zone name using AppleTalk
● Enabling and disabling of status page output
● Error log referencing
● Enabling and disabling of other protocols, along with display of TCP/
IP address, subnet mask, and default gateway address (all of which
can be changed)
● Operating System: Macintosh System 7.5.3 to 9.x, except Mac OS X
Using NIManage
1 On the computer you want to use, copy AppleTalk NIManage Utility
Program to the folder you want.
❍ AppleTalk NIManage Utility Program is located in the APPLTLK
folder on the CD-ROM.
2 Double-click the AppleTalk NIManage Utility Program to start up the
program and display the screen shown below.
❍ Zone
shows the names of the zones on the network.
❍ Device
shows the Network Cards available in each zone.
✎
Note
The Device display panel is blank if there are no zones on the network.
3 On the Zone display panel, select a zone name.