Minolta PI4700E - Manual (Page 84)

Description of each tab 4
Pi4700e 4-1
Pr
op
er
tie
s
S
e
tti
ng
s
Chap
ter
4
4 Properties Settings
4.1 Description of each tab
Each tab enables you to change the settings indicated below. For a de-
tailed description of each function, see the corresponding reference page.
✎
Note
Refer to Chapter 2 for the procedure for displaying Properties.
Note that different settings must be made for each driver.
The differences between each driver are indicated based on the PCL6
version driver for Windows 98.
Details of OS-dependent functions are not given.
Property tab Outline of settings that can be changed
Reference
page
Setup Allows you to set the paper take-up tray and paper exit
tray. Also allows you to set high level printing functions
such as two-sided printing, booklet creation, N-up print-
ing, OHP interleaving, Watermark, Cover Mode, Staple,
Punch, and Folding. p. 4-7
Paper Allows you to set basic printing items such as number of
copies, paper size, print orientation and print zoom ratio.
Also allows you to set functions related to sorting. p. 4-16
Quality Allows you to set general items related to graphics, such
as resolution, halftone processing and image process-
ing method.
Also allows you to set TrueType fonts. p. 4-21
Device Options
Setting Allows you to set option equipment installed on the ma-
chine. p. 4-2
Job Management Sets the copy track function.
Allows you to lock a printing job.
Also allows you to print the distribution number. p. 4-24
PostScript (PS
driver only
Allows you to make detailed settings related to Post-
Script. p. 4-31
– Allows you to save and read the contents of the settings
on a
Setup , Paper , Quality , Job Management , Device
Options Setting or PostScript tab.
p. 4-5