Minolta PI4700E - Manual (Page 122)

Installing the printer driver 5
Pi4700e 5-3
Pr
in
ter
Dr
iv
er
f
o
r Li
nux
Ch
apte
r 5
After installation is complete, the screen shown below will appear.
If an error is output during installation, execute the following commands in
sequence:
# rpm -ivh diutil_pack_file --nodeps
# ln -s /usr/lib/libtcl8.0.so /usr/lib/libtcl.so
# ln -s /usr/lib/libtk8.0.so /usr/X11R6/lib/libtk.so
# ldconfig -n /usr/lib/
# ldconfig -n /usr/X11R6/lib/
✎
Note
Input file name to “diutil_pack_file”.
By executing the above commands in sequence, installation can be per-
formed correctly.