Minolta PI4700E - Manual (Page 145)

5 Properties settings
5-26 Pi4700e
Pr
in
ter
Dr
iv
er
f
o
r Li
nux
Ch
apte
r 5
Functions of the Detail of Paper Source Dialog Box
This function sets the cover page function and the OHP interleaving func-
tion.
✎
Note for (1)
When using special paper such as thick paper, the paper sometimes
fails to be exited to the selected paper exit destination.
You can set Tray1 to Tray4, LCC, LCT and Manual Feed using “Paper
Source”.
(1) Cover Page
This function is used to print a document with front and back cover pages. You can
print on the front cover, or leave it blank.
• Front Cover Page Activates the front cover function.
• with Image
(Front Cover Page)
Prints on the front cover.
• Back Cover Page Adds a back cover.
• with Image
(Back Cover Page)
Prints on the back cover.
• Cover Paper Source Select the tray for the front cover and back cover pa-
pers.
Available settings: Tray1 to Tray4, LCC, LCT, Manual
Feed.
(2) Interleaving Paper
This function inserts sheets (interleaving sheets) between sheets of OHP film when
printing on OHP film. You can either leave these sheets blank or print the same image
as that printed on the OHP film.
• OHP Interleaving Activates the OHP interleaving function.
• with Image Prints an image on the interleaving sheet.
• Interleaving Paper
Source
Select the tray for the interleaving paper.
Available settings: Tray1 to Tray4, LCC, LCT
(1)
(2)