Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 104)

10. 6 x 6 Distributor Platforms
104 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Tie Braces
IMPORTANT: For safety purposes, make sure head of bolts are to the inside of platform with nuts on
outside at all connections.
NOTE: Safety cage bars are used as tie braces in this installation.
Between each of the three (3) “W” corner posts (HP1648HWP), platform post (HP1648HCP) and safety
gate side post (HP1648HP), attach two (2) tie braces (safety cage bar (LDR-5171BE)) from the lower half
of the post to toe boards using 5/16"-18 x 3/4" ZN grade 5 bolts (S-6606) and 5/16"-18 YDP grade 2 flange
nut (S-3611).
(See Figure 10K.)
Figure 10K