Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 58)

8. 42" Head Platform Left Hand Drive
58 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Decking Installation
IMPORTANT: Install ALL decking by starting next to the toe board and working outward. Planks must be
firmly seated next to each other.
Decking Section: Down-Leg Drive Side
1. Install five (5) planks of decking (HSP42007X) on the drive side at the down-leg end. NOTE: Be sure
to install this section of decking by starting at the inside next to the toe board and working outward.
2. Fasten the decking to the support channels (HSP42032X and HSP42012X) using 5/16" x 1" flange
bolts (S-7470) and 5/16" flange nuts (S-3611). (See Figure 8H.)
Figure 8H