Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 105)

10. 6 x 6 Distributor Platforms
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 105
Intermediate Handrail
IMPORTANT: For safety purposes, make sure head of bolts are to the inside of platform with nuts on
outside at all connections.
NOTE: The small intermediate handrail (LDR-4088) fits inside of the large intermediate handrail
(LDR-4087). Identify and separate the large and small intermediate handrails.
Trim six (6) large and six (6) small rails by 14" each so that the remaining length of each rail, both small
and large is 22".
(See Figure 10L.)
1. Install these rails across the platform and the opposite side as shown in Figure 10L .
2. Insert one small rail inside of one large rail and telescope the joined rails from the “W” corner post to
the platform post as shown in Figure 10L .
3. Attach to “W” post (corner post) and platform post using nuts (S-3611) and bolts (S-6606). Torque to
standard specifications.
Figure 10L