Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 32)

6. Tie Angles, Ladders and Safety Cages
32 PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series
Attach Ladders to Ladder Support Brackets for 42"
1. Attach the top of the ladder section to the bottom ladder support brackets.
2. Attach the bottom of the ladder section to the top ladder support brackets.
3. Fasten ladders to ladder support brackets using 1/2" x 1" HHCS bolts (S-7935) and 1/2" flange nuts
(S-8506). (See Figure 6Q for 42" connections.)
Figure 6Q