Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1842 - Manual (Page 63)

8. 42" Head Platform Left Hand Drive
PNEG-1842 42"-48" Bucket Elevator Platform and Ladder “X” Series 63
Down-Leg Hatch Side Decking Section
1. Install three (3) planks of decking (HSP42043X) on the hatch side at the down-leg end.
NOTE: Be sure to install this section of decking by starting at the inside next to the toe board
and working outward.
2. Fasten the decking to the support channel (HSP42065X) using 5/16" x 1" flange bolts (S-7470) and
5/16" flange nuts (S-3611). (See Figure 8M.)
Figure 8M